The Arduino Leonardo is a microcontroller board based on the ATmega32u4.
It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Leonardo differs from all preceding boards in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Leonardo to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port.
|Clock Speed||16 MHz|
|Input Voltage (recommended)||7-12V|
|Input Voltage (limits)||6-20V|
|DC Current per I/O Pin||40 mA|
|DC Current for 3.3V Pin||50 mA|
|Flash Memory||32 KB of which 4 KB used by bootloader|
|Digital I/O Pins||20 (of which 7 provide PWM outputs)|
|Analog Input Pins||12|